Sprite:setLayoutConstraints

Available since: Gideros 2018.9

Class: Sprite

Description

This function specify the child placement rules within the grid defined on its parent by Sprite:setLayoutParameters.

Gideros layout system is heavily based on Java GridBagLayout principle. See here for more explanation: https://www.math.uni-hamburg.de/doc/java/tutorial/uiswing/layout/gridbag.html

The constraint table can contain the following fields:

• gridx: The 0-based index of the column the child must be placed into
• gridy: The 0-based index of the row the child must be placed into
• gridwidth: The number of column this child will take
• gridheight: The number of row this child will take
• weightx: The horizontal weight of the child. Used to distribute extra space among children
• weighty: The vertical weight of the child. Used to distribute extra space among children
• anchor: Defines where the child should be placed inside its grid space.

Can be Sprite.LAYOUT_ANCHOR_NORTHWEST, Sprite.LAYOUT_ANCHOR_NORTH, Sprite.LAYOUT_ANCHOR_NORTHEAST, Sprite.LAYOUT_ANCHOR_WEST, Sprite.LAYOUT_ANCHOR_CENTER, Sprite.LAYOUT_ANCHOR_EAST, Sprite.LAYOUT_ANCHOR_SOUTHWEST, Sprite.LAYOUT_ANCHOR_SOUTH or Sprite.LAYOUT_ANCHOR_SOUTHEAST

• anchorx: Specify relative placement the of child on X axis. anchor mustn't be set since 2020.7
• anchory: Specify relative placement the of child on Y axis. anchor mustn't be set since 2020.7
• fill: In which directions the child should be expanded to fit the grid space.

Can be Sprite.LAYOUT_FILL_NONE, Sprite.LAYOUT_FILL_HORIZONTAL, Sprite.LAYOUT_FILL_VERTICAL or Sprite.LAYOUT_FILL_BOTH

• ipadx: Internal horizontal padding
• ipady: Internal vertical padding
• minWidth: Minimum width
• minHeight: Minimum height
• prefWidth: Preferred width
• prefHeight: Preferred height
• insetTop: the top margin
• insetLeft: the left margin
• insetBottom: the bottom margin
• insetRight: the right margin
• insets: sets the above four margins to the same value at once. since 2020.7

Specifying a nil table will clear layout constraints.
When a Sprite is resized by the layout system, an Event.LAYOUT_RESIZED is triggered.

Sprite:setLayoutConstraints(constraints)

Parameters

constraints: (table) Table of layout constraints.

Examples

Example: pixels

• 

-- LAYOUT CONSTRAINTS @Nanocore
-- BUTTONS HOLDER
local myholder = Pixel.new(0x0, 0.5, 256, 256)
myholder:setPosition(8, 8)
myholder:setLayoutParameters({
	columnWeights = {1, 1, 1}, -- 3 columns
	rowWeights = {1, 1, 1, 1}, -- 4 rows
	columnWidths = {32, 32, 32}, -- min columns width
	rowHeights = {32, 32, 32, 32}, -- min rows width
})

-- BUTTONS
local mybtn1 = Pixel.new(0xff0000, 1, 32, 32)
mybtn1:setLayoutConstraints({
	gridx = 0,
	gridy = 0,
	gridwidth = 2,
	gridheight = 2,
	anchor = Sprite.LAYOUT_ANCHOR_NORTHWEST,
	fill = Sprite.LAYOUT_FILL_BOTH,
})
myholder:addChild(mybtn1)

local mybtn2 = Pixel.new(0x00ff00, 1, 32, 32)
mybtn2:setLayoutConstraints({
	gridx = 1,
	gridy = 2,
	gridwidth = 1,
	anchor = Sprite.LAYOUT_ANCHOR_NORTHWEST,
	fill = Sprite.LAYOUT_FILL_VERTICAL,
})
myholder:addChild(mybtn2)

local mybtn3 = Pixel.new(0x0000ff, 1, 32, 32)
mybtn3:setLayoutConstraints({
	gridx = 2,
	gridy = 3,
	gridwidth = 1,
	anchor = Sprite.LAYOUT_ANCHOR_NORTHWEST,
	fill = Sprite.LAYOUT_FILL_BOTH,
})
myholder:addChild(mybtn3)

-- ADD TO STAGE
stage:addChild(myholder)

---

• Sprite

• Sprite.new

• Sprite:addChild
• Sprite:addChildAt
• Sprite:clearBlendMode
• Sprite:clone
• Sprite:contains
• Sprite:get
• Sprite:getAlpha
• Sprite:getAnchorPoint
• Sprite:getAnchorPosition
• Sprite:getBounds
• Sprite:getChildAt
• Sprite:getChildIndex
• Sprite:getChildrenAtPoint
• Sprite:getClip
• Sprite:getColorTransform
• Sprite:getDrawCount
• Sprite:getHeight
• Sprite:getLayoutConstraints
• Sprite:getLayoutInfo
• Sprite:getLayoutParameters
• Sprite:getMatrix
• Sprite:getNumChildren
• Sprite:getParent
• Sprite:getPosition
• Sprite:getRotation
• Sprite:getRotationX
• Sprite:getRotationY
• Sprite:getScale
• Sprite:getScaleX
• Sprite:getScaleY
• Sprite:getScaleZ
• Sprite:getSize
• Sprite:getSkew
• Sprite:getSkewX
• Sprite:getSkewY
• Sprite:getWidth
• Sprite:getX
• Sprite:getY
• Sprite:getZ
• Sprite:globalToLocal
• Sprite:hitTestPoint
• Sprite:isVisible
• Sprite:localToGlobal
• Sprite:redrawEffects
• Sprite:removeChild
• Sprite:removeChildAt
• Sprite:removeFromParent
• Sprite:set
• Sprite:setAlpha
• Sprite:setAnchorPoint
• Sprite:setAnchorPosition
• Sprite:setBlendMode
• Sprite:setClip
• Sprite:setColorTransform
• Sprite:setEffectConstant
• Sprite:setEffectStack
• Sprite:setGhosts
• Sprite:setLayoutConstraints
• Sprite:setLayoutParameters
• Sprite:setMatrix
• Sprite:setPosition
• Sprite:setRotation
• Sprite:setRotationX
• Sprite:setRotationY
• Sprite:setScale
• Sprite:setScaleX
• Sprite:setScaleY
• Sprite:setScaleZ
• Sprite:setShader
• Sprite:setShaderConstant
• Sprite:setSkew
• Sprite:setSkewX
• Sprite:setSkewY
• Sprite:setStencilOperation
• Sprite:setStopEventPropagation
• Sprite:setVisible
• Sprite:setX
• Sprite:setY
• Sprite:setZ
• Sprite:spriteToLocal
• Sprite:swapChildren
• Sprite:swapChildrenAt

• Sprite.ADD
• Sprite.ALPHA
• Sprite.EFFECT MODE AUTOMATIC
• Sprite.EFFECT MODE CONTINUOUS
• Sprite.EFFECT MODE TRIGGERED
• Sprite.LAYOUT ANCHOR CENTER
• Sprite.LAYOUT ANCHOR EAST
• Sprite.LAYOUT ANCHOR NORTH
• Sprite.LAYOUT ANCHOR NORTHEAST
• Sprite.LAYOUT ANCHOR NORTHWEST
• Sprite.LAYOUT ANCHOR SOUTH
• Sprite.LAYOUT ANCHOR SOUTHEAST
• Sprite.LAYOUT ANCHOR SOUTHWEST
• Sprite.LAYOUT ANCHOR WEST
• Sprite.LAYOUT FILL BOTH
• Sprite.LAYOUT FILL HORIZONTAL
• Sprite.LAYOUT FILL NONE
• Sprite.LAYOUT FILL VERTICAL
• Sprite.MULTIPLY
• Sprite.NO ALPHA
• Sprite.SCREEN
• Sprite.new

• Event.ADDED_TO_STAGE
• Event.ENTER_FRAME
• Event.KEY_CHAR
• Event.KEY_DOWN
• Event.KEY_UP
• Event.LAYOUT_RESIZED
• Event.MOUSE_DOWN
• Event.MOUSE_ENTER
• Event.MOUSE_HOVER
• Event.MOUSE_LEAVE
• Event.MOUSE_MOVE
• Event.MOUSE_UP
• Event.MOUSE_WHEEL
• Event.REMOVED_FROM_STAGE
• Event.TOUCHES_BEGIN
• Event.TOUCHES_CANCEL
• Event.TOUCHES_END
• Event.TOUCHES_MOVE

---

---

• Main Page
• Lua API
• Main API
• Plugins